Grease Type

Super User Uncategorised

 

SARCON SG-07SL and SG-26SL are highly thermally conductive, non-reactive silicone-based greases that

offer low thermal resistance and maintain a non flowable composition. Unique binding agents and product formulation

ensure the lowest amount of bleed and evaporation. Suited for thin bond line applications. 

SARCON SG-07NS, SG-26NS and SG-42NS are non-silicone, polysynthetic-based thermal greases that have high thermal

conductivity properties. Infused with heat-conductive metal oxides, this nonmigrating material operates consistently in high

temperatures. SARCON non-silicone greases offer all the benefits of a silicone-based compound without the problem of contamination. 

 

 

 

 

 

SARCON PG25A

Super User Uncategorised

 

View This information in out catalog   View technical Documents

 

Typical Product Properties

   Sarcon® PG25A Series is a highly conformable and high thermal conducting gel material in a versatile sheet form that easily fits and adheres to most all shapes and sizes of components, including protrusions and recessed areas.
Note: Maximum compression is 50%

Test Property Unit Measure Method
    PG25A  
Thermal Conductivity Watt/m•K 2.5 Hot Disk
Color Visual Gray –
Tensile Strength MPa 0.1 ASTM D412
Specific gravity   2.62 ASTM D 792
Volume resistivity MΩ-m 2.4×105 ASTM D 257
Dielectric strength kV/mm 18 ASTM D 149
Flammability   V-0 Equivalent UL 94

 

 

SARCON PG80B

Super User Uncategorised

 

View This information in out catalog   View technical Documents

 

Typical Product Properties

    Highly Conformable and Non-Flammable, Higher Thermal interface materials SARCON Extremely Compressible Gap Filler Type (Putty Type) is a highly conformable, thermally conductive, non-flammableinterface materials. The surface consistency is excellent for filling small air gaps and uneven mating surface, making reliablecontact with various shapes and sizes of components.

TYPICAL CHARACTERISTICS:

Test Property Unit PG80B Method
Thermal Conductivity   Watt/m•K 8.0 ISO 22007-2
Thermal Resistance
Compression

(original thickness 2.0mm)

 10% N/6.4cm2(psi) 27(6.1) ASTM D575-91
20% 104(23.6)
30% 142(32.2)
50% 212(48.0)
Flame Retardancy   UL94 V-0 UL94
Operating Temperature   °C (°F)

-40 to +150 (-40 to +302)

 Fujipoly
    Recom-mended Range -40 to +150
Color   Visual Red –
Specific Gravity   – 3.3 ASTM D792
Volume Resistivity   MΩ•m 3.0 x 1011 ASTM D257
Breakdown Voltage   kV/mm (volts/mil) 10 (254) ASTM D149
Dielectric Constant: 50Hz – 12.10 ASTM D150
1kHz 9.60
1MHz 8.60
Dissipation Factor: 50Hz – 0.533 AST

 

 

SARCON PG45A

Super User Uncategorised

 

View This information in out catalog   View technical Documents

 

Typical Product Properties

     Sarcon® PG45A is the lowest modulus thermal interface putty available. It is ideally suited for applications requiring low compression force on the component. The putty-like material exhibits a high thermal conductivity and low thermal resistance while conforming to even the smallest protrusions and depressions on components to make complete, reliable physical contact.

Note: Maximum recommended compression is 30%

Test Property Unit Measure Method
    PG45A  
Thermal Conductivity Watt/m•K 4.5 Hot Disk
Color Visual Gray –
Specific gravity   3.0 ASTM D 792
Dielectric Constant 1kHz 7.3 –
Flammability   V-0 Equivalent

SARCON PG130A

Super User Uncategorised

 

View This information in out catalog  

View technical Documents

 

Highly Conformable and Non-Flammable, Higher Thermal interface materials SARCON Extremely Compressible Gap Filler Type (Putty Type) is a highly conformable, thermally conductive, non-flammableinterface materials. The surface consistency is excellent for filling small air gaps and uneven mating surface, making reliablecontact with various shapes and sizes of components.

TYPICAL CHARACTERISTICS:

Test Property Unit PG130A Method
Thermal Conductivity   Watt/m•K 13.0 ISO 22007-2
Thermal Resistance
Compression

(original thickness 2.0mm)

 100kPa /14.5psi K-cm2/W 1.07(0.17) ASTM D5470 equiv.
300kPa /43.5psi 0.41(0.06)
500kPa /72.5psi 0.22(0.03)
Flame Retardancy   UL94 TBA UL94
Operating Temperature   °C (°F)

-40 to +150 (-40 to +302)

 Fujipoly
    Recommended
Range		 -40 to +150
Color   Visual Pink –
Specific Gravity   – 3.0 ASTM D792
Volume Resistivity   MΩ•m 2.0 x 109 ASTM D257
Breakdown Voltage   kV/mm (volts/mil) 13(330) ASTM D149
Dielectric Constant: 50Hz – 13.60 ASTM D150
1kHz 10.60
1MHz 9.30
Dissipation Factor: 50Hz – 0.500 ASTM D150
1kHz 0.095
1MHz 0.029

 

 

sssss

 

We are leaders in the design, formulation and production of high-performance Thermal Interface Materials,Elastomeric Connectors and Custom Silicone Extrusions.

We operate a global network of 9 manufacturing and distribution centers to deliver you unprecedentedproduct performance and dependability.

Facebook FJPTL

CONTACT US

Fujipoly (Thailand) Co., Ltd.


55/8 Moo 13 Navanakorn Industrial Estate Phase 4 Phaholyothin Road,
Klong Nueng,Klong Luang Phathumthanee 12120,Thailand
Phone： 02-529-2732-5,02-070-3976-7　Fax：02-529-2223

Email: Marketing@fujipoly.co.th  / Parichat_p@fujipoly.co.th
Facebook:Fujipoly - Thailand Co.,Ltd

 

LATEST POSTS

NEPCON Vietnam 2024

Manufacturing Expo 2024

Copyright 2019 © Fujipoly(Thailand). Ltd. All rights Reserved.

MAIN MANU OFFCEANVAS